🔊 Listen to this page

If your DMR Radio has a keypad, you can most likely use this.

Dial-a-TG.

CPS.

Add  9  in contact / talk group as GROUP CALL.

Make a Channel up for Talk Group 9 on Slot 2 and then add to a Zone you wish to use it in.
This is the only Talk group you will need for a QSO on Dial-a-TG.

• You will need Hang Time for Private Call or Person Call set to 3 sec in the CPS.
• This will drop the Private Call back to TG9 in 3  seconds to QSO on the Talk Group.

Via the radio. –

Go to the Channel with TG9 on Slot 2.

Depending your menu layout –

Menu - Contact - Manual Dial - enter Talk Group number 2350 - PTT for up to 3 sec.
Or
Menu – Talk Group - Manual Dial - enter Talk Group number 2350 - PTT for up to 3 sec.

= Manual Dial 2350 Private Call, PTT for up to 3 sec.

The repeater/hotspot will respond with a voice announcement “Linked to  2350.“
“Voice announcements come back on 5000.”
Then via Talk Group 9 you can QSO on that Talk Group.
You can link to any Talk Group as described above.

To Unlink.

Manual Dial 4000 Private Call, PTT for up to 3 sec.
The repeater / hotspot will respond with a voice announcement “Not Linked”.
You can move to a new Talk Group without doing a 4000. Just call the next Talk Group as above and PTT for up to 3 sec.
Would be recommended to make a 4000 unlink channel. Add 4000 as a Private call to the radio. Set TG9 in the RX Group. Now when you get a GAP in RX you can PTT and unlink.

Anytone Radios.